Tag: Basics of Computer Networks

Subnetting in Networking | Subnetting Examples

Computer Networks

Subnetting in Networking-

 

In networking,

  • The process of dividing a single network into multiple sub networks is called as subnetting.
  • The sub networks so created are called as subnets.

 

Example-

 

Following diagram shows the subnetting of a big single network into 4 smaller subnets-

 

 

Advantages-

 

The two main advantages of subnetting a network are-

  • It improves the security.
  • The maintenance and administration of subnets is easy.

 

Subnet ID-

 

  • Each subnet has its unique network address known as its Subnet ID.
  • The subnet ID is created by borrowing some bits from the Host ID part of the IP Address.
  • The number of bits borrowed depends on the number of subnets created.

 

Types of Subnetting-

 

Subnetting of a network may be carried out in the following two ways-

 

 

  1. Fixed Length Subnetting
  2. Variable Length Subnetting

 

1. Fixed Length Subnetting-

 

Fixed length subnetting also called as classful subnetting divides the network into subnets where-

  • All the subnets are of same size.
  • All the subnets have equal number of hosts.
  • All the subnets have same subnet mask.

 

2. Variable Length Subnetting-

 

Variable length subnetting also called as classless subnetting divides the network into subnets where-

  • All the subnets are not of same size.
  • All the subnets do not have equal number of hosts.
  • All the subnets do not have same subnet mask.

 

Subnetting Examples-

 

Now, we shall discuss some examples of subnetting a network-

 

Example-01:

 

Consider-

  • We have a big single network having IP Address 200.1.2.0.
  • We want to do subnetting and divide this network into 2 subnets.

 

Clearly, the given network belongs to class C.

 

 

Also Read- Classes of IP Address

 

For creating two subnets and to represent their subnet IDs, we require 1 bit.

So,

  • We borrow one bit from the Host ID part.
  • After borrowing one bit, Host ID part remains with only 7 bits.

 

 

  • If borrowed bit = 0, then it represents the first subnet.
  • If borrowed bit = 1, then it represents the second subnet.

 

IP Address of the two subnets are-

  • 200.1.2.00000000 = 200.1.2.0
  • 200.1.2.10000000 = 200.1.2.128

 

 

For 1st Subnet-

 

  • IP Address of the subnet = 200.1.2.0
  • Total number of IP Addresses = 27 = 128
  • Total number of hosts that can be configured = 128 – 2 = 126
  • Range of IP Addresses = [200.1.2.00000000, 200.1.2.01111111] = [200.1.2.0, 200.1.2.127]
  • Direct Broadcast Address = 200.1.2.01111111 = 200.1.2.127
  • Limited Broadcast Address = 255.255.255.255

 

For 2nd Subnet-

 

  • IP Address of the subnet = 200.1.2.128
  • Total number of IP Addresses = 27 = 128
  • Total number of hosts that can be configured = 128 – 2 = 126
  • Range of IP Addresses = [200.1.2.10000000, 200.1.2.11111111] = [200.1.2.128, 200.1.2.255]
  • Direct Broadcast Address = 200.1.2.11111111 = 200.1.2.255
  • Limited Broadcast Address = 255.255.255.255

 

Example-02:

 

Consider-

  • We have a big single network having IP Address 200.1.2.0.
  • We want to do subnetting and divide this network into 4 subnets.

 

Clearly, the given network belongs to class C.

 

 

For creating four subnets and to represent their subnet IDs, we require 2 bits.

So,

  • We borrow two bits from the Host ID part.
  • After borrowing two bits, Host ID part remains with only 6 bits.

 

 

  • If borrowed bits = 00, then it represents the 1st subnet.
  • If borrowed bits = 01, then it represents the 2nd subnet.
  • If borrowed bits = 10, then it represents the 3rd subnet.
  • If borrowed bits = 11, then it represents the 4th subnet.

 

IP Address of the four subnets are-

  • 200.1.2.00000000 = 200.1.2.0
  • 200.1.2.01000000 = 200.1.2.64
  • 200.1.2.10000000 = 200.1.2.128
  • 200.1.2.11000000 = 200.1.2.192

 

 

For 1st Subnet-

 

  • IP Address of the subnet = 200.1.2.0
  • Total number of IP Addresses = 26 = 64
  • Total number of hosts that can be configured = 64 – 2 = 62
  • Range of IP Addresses = [200.1.2.00000000, 200.1.2.00111111] = [200.1.2.0, 200.1.2.63]
  • Direct Broadcast Address = 200.1.2.00111111 = 200.1.2.63
  • Limited Broadcast Address = 255.255.255.255

 

For 2nd Subnet-

 

  • IP Address of the subnet = 200.1.2.64
  • Total number of IP Addresses = 26 = 64
  • Total number of hosts that can be configured = 64 – 2 = 62
  • Range of IP Addresses = [200.1.2.01000000, 200.1.2.01111111] = [200.1.2.64, 200.1.2.127]
  • Direct Broadcast Address = 200.1.2.01111111 = 200.1.2.127
  • Limited Broadcast Address = 255.255.255.255

 

For 3rd Subnet-

 

  • IP Address of the subnet = 200.1.2.128
  • Total number of IP Addresses = 26 = 64
  • Total number of hosts that can be configured = 64 – 2 = 62
  • Range of IP Addresses = [200.1.2.10000000, 200.1.2.10111111] = [200.1.2.128, 200.1.2.191]
  • Direct Broadcast Address = 200.1.2.10111111 = 200.1.2.191
  • Limited Broadcast Address = 255.255.255.255

 

For 4th Subnet-

 

  • IP Address of the subnet = 200.1.2.192
  • Total number of IP Addresses = 26 = 64
  • Total number of hosts that can be configured = 64 – 2 = 62
  • Range of IP Addresses = [200.1.2.11000000, 200.1.2.11111111] = [200.1.2.192, 200.1.2.255]
  • Direct Broadcast Address = 200.1.2.11111111 = 200.1.2.255
  • Limited Broadcast Address = 255.255.255.255

 

Example-03:

 

Consider-

  • We have a big single network having IP Address 200.1.2.0.
  • We want to do subnetting and divide this network into 3 subnets.

 

Here, the subnetting will be performed in two steps-

  1. Dividing the given network into 2 subnets
  2. Dividing one of the subnets further into 2 subnets

 

Step-01: Dividing Given Network into 2 Subnets-

 

The subnetting will be performed exactly in the same way as performed in Example-01.

After subnetting, we have-

 

 

Step-02: Dividing One Subnet into 2 Subnets-

 

  • We perform the subnetting of one of the subnets further into 2 subnets.
  • Consider we want to do subnetting of the 2nd subnet having IP Address 200.1.2.128.

 

For creating two subnets and to represent their subnet IDs, we require 1 bit.

So,

  • We borrow one more bit from the Host ID part.
  • After borrowing one bit, Host ID part remains with only 6 bits.

 

 

  • If 2nd borrowed bit = 0, then it represents one subnet.
  • If 2nd borrowed bit = 1, then it represents the other subnet.

 

IP Address of the two subnets are-

  • 200.1.2.10000000 = 200.1.2.128
  • 200.1.2.11000000 = 200.1.2.192

 

 

Finally, the given single network is divided into 3 subnets having IP Address-

  • 200.1.2.0
  • 200.1.2.128
  • 200.1.2.192

 

For 1st Subnet-

 

  • IP Address of the subnet = 200.1.2.0
  • Total number of IP Addresses = 27 = 128
  • Total number of hosts that can be configured = 128 – 2 = 126
  • Range of IP Addresses = [200.1.2.00000000, 200.1.2.01111111] = [200.1.2.0, 200.1.2.127]
  • Direct Broadcast Address = 200.1.2.01111111 = 200.1.2.127
  • Limited Broadcast Address = 255.255.255.255

 

For 2nd Subnet-

 

  • IP Address of the subnet = 200.1.2.128
  • Total number of IP Addresses = 26 = 64
  • Total number of hosts that can be configured = 64 – 2 = 62
  • Range of IP Addresses = [200.1.2.10000000, 200.1.2.10111111] = [200.1.2.128, 200.1.2.191]
  • Direct Broadcast Address = 200.1.2.10111111 = 200.1.2.191
  • Limited Broadcast Address = 255.255.255.255

 

For 3rd Subnet-

 

  • IP Address of the subnet = 200.1.2.192
  • Total number of IP Addresses = 26 = 64
  • Total number of hosts that can be configured = 64 – 2 = 62
  • Range of IP Addresses = [200.1.2.11000000, 200.1.2.11111111] = [200.1.2.192, 200.1.2.255]
  • Direct Broadcast Address = 200.1.2.11111111 = 200.1.2.255
  • Limited Broadcast Address = 255.255.255.255

 

Disadvantages of Subnetting-

 

Point-01:

 

Subnetting leads to loss of IP Addresses.

 

During subnetting,

  • We have to face a loss of IP Addresses.
  • This is because two IP Addresses are wasted for each subnet.
  • One IP address is wasted for its network address.
  • Other IP Address is wasted for its direct broadcasting address.

 

Point-02:

 

Subnetting leads to complicated communication process.

 

After subnetting, the communication process becomes complex involving the following 4 steps-

  1. Identifying the network
  2. Identifying the sub network
  3. Identifying the host
  4. Identifying the process

 

PRACTICE PROBLEMS BASED ON SUBNETTING IN NETWORKING-

 

Problem-01:

 

Suppose a network with IP Address 192.16.0.0. is divided into 2 subnets, find number of hosts per subnet.

Also for the first subnet, find-

  1. Subnet Address
  2. First Host ID
  3. Last Host ID
  4. Broadcast Address

 

Solution-

 

  • Given IP Address belongs to class C.
  • So, 24 bits are reserved for the Net ID.
  • The given network is divided into 2 subnets.
  • So, 1 bit is borrowed from the host ID part for the subnet IDs.
  • Then, Number of bits remaining for the Host ID = 7.
  • Thus, Number of hosts per subnet = 27 = 128.

 

For 1st Subnet-

 

  • Subnet Address = First IP Address =  192.16.0.00000000 = 172.16.0.0
  • First Host ID = 192.16.0.00000001 = 192.16.0.1
  • Last Host ID = 192.16.0.01111110 = 192.16.0.126
  • Broadcast Address = Last IP Address = 192.16.0.01111111 = 172.16.0.127

 

Problem-02:

 

What is not true about subnetting?

  1. It is applied for a single network
  2. It is used to improve security
  3. Bits are borrowed from network portion
  4. Bits are borrowed from Host portion

 

Solution-

 

Clearly, Option (C) is correct.

 

Problem-03:

 

In a class B, network on the internet has a subnet mask of 255.255.240.0. What is the maximum number of hosts per subnet?

  1. 4096
  2. 4094
  3. 4092
  4. 4090

 

Solution-

 

  • Number of bits reserved for network ID in the given subnet mask = 20.
  • So, Number of bits reserved for Host ID = 32 – 20 = 12 bits.
  • Thus, Number of hosts per subnet = 212 – 2 = 4094.
  • In class B, 16 bits are reserved for the network.
  • So, Number of bits reserved for subnet ID = 20 – 16 = 4 bits.
  • Number of subnets possible = 24 = 16.
  • Thus, Option (B) is correct.

 

To gain better understanding about IPv4 Subnetting,

Watch this Video Lecture

 

Next Article- Subnet Mask | Calculating Subnet Mask

 

Get more notes and other study material of Computer Networks.

Watch video lectures by visiting our YouTube channel LearnVidFun.

IP Address in Networking | Problems

Computer Networks

IP Address in Networking-

 

Before you go through this article, make sure that you have gone through the previous article on IP Address.

 

We have discussed-

  • IP Address is a unique address assigned to each computing device in an IP network.
  • ISP assigns IP Address to all the devices present on its network.
  • Casting refers to transmitting data (stream of packets) over the network.

 

Also Read- Types of Casting

 

In this article, we will discuss some practice problems based on IP Address.

 

Important Points-

 

Point-01:

 

For any given IP Address,

  • If the range of first octet is [1, 126], then IP Address belongs to class A.
  • If the range of first octet is [128, 191], then IP Address belongs to class B.
  • If the range of first octet is [192, 223], then IP Address belongs to class C.
  • If the range of first octet is [224, 239], then IP Address belongs to class D.
  • If the range of first octet is [240, 254], then IP Address belongs to class E.

 

Point-02:

 

For any given IP Address,

  • IP Address of its network is obtained by setting all its Host ID part bits to 0.

 

Point-03:

 

For any given IP Address,

  • Direct Broadcast Address is obtained by setting all its Host ID part bits to 1.

 

Point-04:

 

  • For any given IP Address, limited Broadcast Address is obtained by setting all its bits to 1.
  • For any network, its limited broadcast address is always 255.255.255.255

 

Point-05:

 

  • Class D IP Addresses are not divided into Net ID and Host ID parts.
  • Class E IP Addresses are not divided into Net ID and Host ID parts.

 

PRACTICE PROBLEMS BASED ON IP ADDRESS IN NETWORKING-

 

Problem-01:

 

For the following IP Addresses-

  1. 1.2.3.4
  2. 10.15.20.60
  3. 130.1.2.3
  4. 150.0.150.150
  5. 200.1.10.100
  6. 220.15.1.10
  7. 250.0.1.2
  8. 300.1.2.3

 

Identify the Class, Network IP Address, Direct broadcast address and Limited broadcast address of each IP Address.

 

Solution-

 

Part-A:

 

Given IP Address is-

1.2.3.4

 

  • IP Address belongs to class A
  • Network IP Address = 1.0.0.0
  • Direct Broadcast Address = 1.255.255.255
  • Limited Broadcast Address = 255.255.255.255

 

Part-B:

 

Given IP Address is-

10.15.20.60

 

  • IP Address belongs to class A
  • Network IP Address = 10.0.0.0
  • Direct Broadcast Address = 10.255.255.255
  • Limited Broadcast Address = 255.255.255.255

 

Part-C:

 

Given IP Address is-

130.1.2.3

 

  • IP Address belongs to class B
  • Network IP Address = 130.1.0.0
  • Direct Broadcast Address = 130.1.255.255
  • Limited Broadcast Address = 255.255.255.255

 

Part-D:

 

Given IP Address is-

150.0.150.150

 

  • IP Address belongs to class B
  • Network IP Address = 150.0.0.0
  • Direct Broadcast Address = 150.0.255.255
  • Limited Broadcast Address = 255.255.255.255

 

Part-E:

 

Given IP Address is-

200.1.10.100

 

  • IP Address belongs to class C
  • Network IP Address = 200.1.10.0
  • Direct Broadcast Address = 200.1.10.255
  • Limited Broadcast Address = 255.255.255.255

 

Part-F:

 

Given IP Address is-

220.15.1.10

 

  • IP Address belongs to class C
  • Network IP Address = 220.15.1.0
  • Direct Broadcast Address = 220.15.1.255
  • Limited Broadcast Address = 255.255.255.255

 

Part-G:

 

Given IP Address is-

250.0.1.2

 

  • IP Address belongs to class E
  • Network IP Address = Not available
  • Direct Broadcast Address = Not available
  • Limited Broadcast Address = Not available

 

Part-H:

 

Given IP Address is-

300.1.2.3

 

  • This is not a valid IP Address.
  • This is because for any given IP Address, the range of its first octet is always [1, 254].
  • First and Last IP Addresses are reserved.

 

Problem-02:

 

A device has two or more IP Addresses, the device is called-

  1. Workstation
  2. Router
  3. Gateway
  4. All of these

 

Solution-

 

  • All the given devices have a network layer.
  • So, they will have at least one IP Address.

 

In TCP/IP suite-

  • Workstation and gateway have all the 5 layers.
  • Router has only 3 layers last layer being network layer.

 

Workstation-

 

  • A user may configure more than one IP Addresses in his workstation / computer.
  • With more than one IP Address, it remains present in more than one networks.
  • So, if one network goes down, it is always reachable from other networks.

 

The following figure shows a host present in more than one networks-

 

 

  • It is important to note that IP Addresses are assigned to interfaces.
  • When we buy a new laptop, we usually get 2-3 interfaces.
  • Thus, a workstation can have more than one IP Addresses.

 

Router-

 

  • A router may be connected to various interfaces.
  • Each interface has a unique IP Address.
  • Thus, a router may also have more than IP Addresses.
  • Similar is the case with gateways because gateways are extension of routers.

 

Thus, Option (D) is correct.

 

Problem-03:

 

A host with IP Address 200.100.1.1 wants to send a packet to all the hosts in the same network.

What will be-

  1. Source IP Address
  2. Destination IP Address

 

Solution-

 

  1. Source IP Address = IP Address of the sender = 200.100.1.1
  2. Destination IP Address = Limited Broadcast Address = 255.255.255.255

 

Problem-04:

 

A host with IP Address 10.100.100.100 wants to use loop back testing.

What will be-

  1. Source IP Address
  2. Destination IP Address

 

Solution-

 

  • Source IP Address = 10.100.100.100
  • Destination IP Address = Loopback Testing Address = 127.0.0.1

 

Problem-05:

 

How many bits are allocated for Network ID and Host ID in 23.192.157.234 address?

 

Solution-

 

Given IP Address belongs to class A.

Thus,

  • Number of bits reserved for Network ID = 8
  • Number of bits reserved for Host ID = 24

 

Problem-06:

 

Which devices can use logical addressing system?

  1. Hub
  2. Switch
  3. Bridge
  4. Router

 

Solution-

 

  • Devices which have network layer as the last layer can only use logical addressing system.
  • Devices which have data link layer as the last layer can only use physical addressing system.
  • IP Addresses are the logical addresses and MAC Addresses are the physical addresses.

 

Option-A:

 

  • Hub can neither use physical addressing system nor logical addressing system.
  • This is because it has physical layer as the last layer.

 

Option-B:

 

  • Switch can use physical addressing system but not logical addressing system.
  • This is because it has data link layer as the last layer.

 

Option-C:

 

  • Bridge can use physical addressing system but not logical addressing system.
  • This is because it has data link layer as the last layer.

 

Option-D:

 

  • Router can use physical addressing system as well as logical addressing system.
  • This is because it has network layer as the last layer.

 

Thus, option (D) is correct.

 

Problem-07:

 

What is the network ID of the IP Address 230.100.123.70?

 

Solution-

 

  • Given IP Address belongs to class D.
  • Class D IP Addresses are not divided into the Network ID and Host ID parts.
  • Thus, there is no network ID for the given IP Address.

 

Problem-08:

 

Match the following-

 

Column-I:

 

  1. 200.10.192.100
  2. 7.10.230.1
  3. 128.1.1.254
  4. 255.255.255.255
  5. 100.255.255.255

 

Column-II:

 

  1. Class A
  2. Limited Broadcast Address
  3. Direct Broadcast Address
  4. Class C
  5. Class B

 

Solution-

 

(I, D), (II, A), (III, E), (IV, B), (V, C)

 

Problem-09:

 

Suppose that instead of using 16 bits for network part of a class B Address, 20 bits have been used. How many class B networks would have been possible?

 

Solution-

 

  • Total 20 bits are used for Network ID of class B.
  • The first two bits are always set to 10.
  • Then, with 18 bits, number of networks possible = 218

 

Problem-10:

 

What is the default mask for 192.0.46.10?

 

Solution-

 

  • Given IP Address belongs to class C.
  • For class C, default mask = 255.255.255.0

 

Next Article- Classless Addressing

 

Get more notes and other study material of Computer Networks.

Watch video lectures by visiting our YouTube channel LearnVidFun.

TCP Sequence Number | Wrap Around Time

Computer Networks

Transmission Control Protocol-

 

Before you go through this article, make sure that you have gone through the previous article on TCP in Networking.

 

We have discussed-

  • TCP continuously receives data from the application layer.
  • It divides the data into chunks where each chunk is a collection of bytes.
  • It then creates TCP segments by adding a TCP header to the data chunks.

 

TCP segment = TCP header + Data chunk

 

Also Read- TCP Header

 

In this article, we will discuss about TCP Sequence Number.

 

TCP Sequence Number-

 

  • Each TCP segment sent by the sender contains some bytes of data.
  • TCP assigns a unique number to each data byte for its identification.
  • This unique number is called as TCP Sequence Number.

 

Purpose-

 

Sequence number serves the following purposes-

  • It helps to identify each data byte uniquely.
  • It helps in the segmentation of data into TCP segments and reassemble them later.
  • It helps to keep track of how much data has been transferred and received.
  • It helps to put the data back into the correct order if it is received in the wrong order.
  • It helps to request data when it has been lost in transit.

 

Maximum Number of Sequence Numbers-

 

  • In TCP header, sequence number is a 32 bit field.
  • So, maximum number of possible sequence numbers = 232.
  • These sequence numbers lie in the range [0 , 232 – 1].

 

NOTE-

 

  • Maximum number of possible sequence numbers = 232.
  • This does not imply that only 232 bytes = 4 GB data can be sent using TCP.
  • The concept of wrap around allows to send unlimited data using TCP.

 

Concept Of Wrap Around-

 

The concept of wrap around states-

 

After all the 232 sequence numbers are used up and more data is to be sent,

the sequence numbers can be wrapped around and used again from the starting.

 

In general,

  • If the initial sequence number chosen is X.
  • Then sequence numbers are used from X to 232 – 1 and then from to 0 to X-1.
  • Then, sequence numbers are wrapped around to send more data.

 

Example-

 

  • Consider the initial sequence number used is 0.
  • Then after sending 4 GB data, all the sequence numbers would get used up.
  • To send more data, sequence numbers are reused from the starting.
  • Wrapping around can be done again and again to send more and more data.

 

Wrap Around Time-

 

  • Time taken to use up all the 232 sequence numbers is called as wrap around time.
  • It depends on the bandwidth of the network i.e. the rate at which the bytes go out.
  • More the bandwidth, lesser the wrap around time and vice versa.

 

Wrap Around Time ∝ 1 / Bandwidth

 

Formula-

 

If bandwidth of the network = x bytes/sec, then-

 

 

Life Time Of TCP Segment-

 

In modern computers,

  • Life time of a TCP segment is 180 seconds or 3 minutes.
  • It means after sending a TCP segment, it might reach the receiver taking 3 minutes in the worst case.

 

How Wrap Around Is Possible?

 

It is possible to wrap around the sequence numbers because-

  • The life time of a TCP segment is just 180 seconds.
  • Wrap around time is much greater than life time of a TCP segment.
  • So, by the time the sequence numbers wrap around, there is no probability of existing any segment having the same sequence number.
  • Thus, even after wrapping around, the sequence number of all the bytes will be unique at any given time.

 

Reducing Wrap Around Time-

 

Wrap around time can be reduced to the life time of a TCP segment.

 

This is because-

  • After the life time of a segment completes, it is considered that the segment no longer exists.
  • So, sequence numbers used by the segment frees up and can be reused.

 

To reduce the wrap around time to the life time of segment,

  • There must exist as many sequence numbers as there are number of data bytes sent in time equal to life time of segment.

 

Formula-

 

Number of bits required in the sequence number field

so that wrap around time becomes equal to lifetime of TCP segment

= log2 (lifetime of TCP segment x Bandwidth)

 

  • The number of bits will be greater than 32 bits.
  • The extra bits are appended in the Options field of TCP header.

 

PRACTICE PROBLEMS BASED ON WRAP AROUND TIME IN TCP-

 

Problem-01:

 

Given the bandwidth of a network is 1 MB / sec. Calculate the wrap around time.

 

Solution-

 

We know,

  • Wrap around time = Time taken to use all the 232 sequence numbers.
  • TCP assigns 1 sequence number to each byte of data.

 

To calculate wrap around time, we just need to calculate how much time will be taken to send 232 bytes of data.

 

Now,

  • Given bandwidth = 1 MB / sec = 106 bytes / sec.
  • It means 106 bytes of data is sent in time = 1 sec.
  • So, 232 bytes of data will be sent in time = ( 1 / 106 ) x 232 sec.
  • On solving, we get 1.19 hours.

 

Thus,

  • It will take 1.19 hours to consume all the 232 sequence numbers if bandwidth = 1 MB / sec.
  • Wrap Around Time = 1.19 hours.

 

Alternatively,

Using the formula, we have-

Wrap Around Time

= 232 / 106 sec

= 1.19 hours

 

Problem-02:

 

If bandwidth of the network is 1 GBps, how many extra bits will have to be appended in the Options field so that wrap around time becomes equal to the life time of segment?

 

Solution-

 

For wrap around time to become equal to the life time of TCP segment,

Number of sequence numbers required = Number of bytes sent in life time of TCP segment

 

We know-

  • Life time of TCP segment = 180 sec.
  • Bandwidth of the network = 1 GBps (Given)

 

Now,

  • Number of bytes transferred in 1 sec = 1 GB
  • So, number of bytes transferred in 180 sec = 180 GB = 180 x 230 bytes
  • So, number of sequence numbers required = 180 x 230

 

Suppose y number of bits in the sequence number field are required to represent the value 180 x 230.

 

So, we have-

2y = 180 x 230

ylog2 = log(180 x 230)

y = log2(180 x 230)

y = log2180 + log2230

y = 7.49 + 30

y ≅ 38

 

From here,

  • Total number of bits required for sequence numbers = 38 bits.
  • In TCP header, sequence number field is a 32 bit field.
  • So, extra bits required to be appended in the Options field = 38 – 32 = 6 bits.

 

Alternatively,

Using the formula, we have-

Total bits required

= log2 (life time of TCP segment x bandwidth)

= log2 ( 180 x 230)

= log2180 + log2230

= 7.49 + 30

= 38

 

From here,

  • Total number of bits required for sequence numbers = 38 bits.
  • In TCP header, sequence number field is a 32 bit field.
  • So, extra bits required to be appended in the Options field = 38 – 32 = 6 bits.

 

Problem-03:

 

In a network that has a maximum TPDU size of 128 bytes, a maximum TPDU lifetime of 30 sec and 8 bit sequence number, what is the maximum data rate per connection?

(TPDU is Transport layer protocol data unit which is the segment.)

 

Solution-

 

Given-

  • Maximum segment size (MSS) = 128 bytes
  • Segment lifetime = 30 sec
  • Bits in sequence number = 8

 

Now,

  • Maximum number of possible sequence numbers using 8 bits = 28 = 256.
  • So, maximum number of bytes that can be uniquely identified = 256 bytes.
  • Lifetime of a segment = 30 seconds.
  • So, maximum amount of data that can be sent in 30 seconds = 256 bytes.

 

Thus,

Maximum data rate per connection

= 256 bytes / 30 seconds

≈ 68 bits/sec

 

Problem-04:

 

Suppose that the advertised window 1 MB long. If a sequence number is selected at random from the entire sequence number space, what is the probability that the sequence number falls inside the advertised window?

 

Solution-

 

We know,

  • Number of bits in sequence number field = 32 bits.
  • So, Maximum number of sequence numbers possible = 232.
  • 232 bytes of data can be labeled uniquely with these sequence numbers.
  • Advertised window size = 1 MB = 220 bytes which uses 220 sequence numbers.

 

Therefore,

Required probability

= 220 / 232

= 1 / 212

 

Next Article- Three Way Handshake

 

Get more notes and other study material of Computer Networks.

Watch video lectures by visiting our YouTube channel LearnVidFun.

Unicast Broadcast Multicast | IP Address

Computer Networks

IP Address in Networking-

 

Before you go through this article, make sure that you have gone through the previous article on IP Address.

 

We have discussed-

  • IP Address is a 32 bit address that uniquely identifies each device on the network.
  • It is assigned by ISP to each device present on its network.

 

In this article, we will discuss about casting.

 

Casting in Networking-

 

Transmitting data (stream of packets) over the network is termed as casting.

 

Types Of Casting-

 

 

  1. Unicast
  2. Broadcast
  3. Multicast

 

1. Unicast-

 

  • Transmitting data from one source host to one destination host is called as unicast.
  • It is a one to one transmission.

 

 

Example-

 

Host A having IP Address 11.1.2.3 sending data to host B having IP Address 20.12.4.2.

Here,

  • Source Address = IP Address of host A = 11.1.2.3
  • Destination Address = IP Address of host B = 20.12.4.2

 

2. Broadcast-

 

  • Transmitting data from one source host to all other hosts residing in the same or other network is called as broadcast.
  • It is a one to all transmission.

 

Based on recipient’s network, it is classified as-

  1. Limited Broadcast
  2. Direct Broadcast

 

A. Limited Broadcast-

 

  • Transmitting data from one source host to all other hosts residing in the same network is called as limited broadcast.

 

 

NOTE

Limited Broadcast Address for any network

= All 32 bits set to 1

= 11111111.11111111.11111111.11111111

= 255.255.255.255

 

Example-

 

Host A having IP Address 11.1.2.3 sending data to all other hosts residing in the same network.

Here,

  • Source Address = IP Address of host A = 11.1.2.3
  • Destination Address = 255.255.255.255

 

B. Direct Broadcast-

 

  • Transmitting data from one source host to all other hosts residing in some other network is called as direct broadcast.

 

 

NOTE

Direct Broadcast Address for any network is the IP Address where-

  • Network ID is the IP Address of the network where all the destination hosts are present.
  • Host ID bits are all set to 1.

 

Example-

 

Host A having IP Address 11.1.2.3 sending data to all other hosts residing in the network having IP Address 20.0.0.0

Here,

  • Source Address = IP Address of host A = 11.1.2.3
  • Destination Address = 20.255.255.255

 

3. Multicast-

 

  • Transmitting data from one source host to a particular group of hosts having interest in receiving the data is called as multicast.
  • It is a one to many transmission.

 

 

Examples-

 

  • Sending a message to a particular group of people on whatsapp
  • Sending an email to a particular group of people
  • Video conference or teleconference

 

MAC Address Vs IP Address-

 

The following table summarizes the differences between MAC Address and IP Address-

 

MAC Address IP Address
It stands for Media Access Control Address. It stands for Internet Protocol Address.
MAC Address identifies the physical address of a computer on the internet. IP Address identifies the connection of a computer on the internet.
Manufacturer of NIC card assigns the MAC Address. Network Administrator or ISP assigns the IP Address.
Reverse Address Resolution Protocol (RARP) is used for resolving physical (MAC) Address into IP address. Address Resolution Protocol (ARP) is used for resolving IP Address into physical (MAC) address.

 

NOTE-

 

  • Multicast makes use of IGMP (Internet Group Management Protocol) to identify its group.
  • Each group is assigned with an IP Address from class D of IPv4.

 

To gain better understanding about Unicast Broadcast Multicast,

Watch this Video Lecture

 

Next Article- Practice Problems On IP Address

 

Get more notes and other study material of Computer Networks.

Watch video lectures by visiting our YouTube channel LearnVidFun.

IP Address in Networking | Classes of IP Address

Computer Networks

IP Address in Networking-

 

In networking,

  • IP Address is short for Internet Protocol Address.
  • It is a unique address assigned to each computing device in an IP network.
  • ISP assigns IP Address to all the devices present on its network.
  • Computing devices use IP Address to identify and communicate with other devices in the IP network.

 

Types Of IP Address-

 

IP Addresses may be of the following two types-

 

 

  1. Static IP Address
  2. Dynamic IP Address

 

1. Static IP Address-

 

  • Static IP Address is an IP Address that once assigned to a network element always remains the same.
  • They are configured manually.

 

NOTE

  • Some ISPs do not provide static IP addresses.
  • Static IP Addresses are more costly than dynamic IP Addresses.

 

2. Dynamic IP Address-

 

  • Dynamic IP Address is a temporarily assigned IP Address to a network element.
  • It can be assigned to a different device if it is not in use.
  • DHCP or PPPoE assigns dynamic IP addresses.

 

IP Address Format-

 

  • IP Address is a 32 bit binary address written as 4 numbers separated by dots.
  • The 4 numbers are called as octets where each octet has 8 bits.
  • The octets are divided into 2 components- Net ID and Host ID.

 

 

  1. Network ID represents the IP Address of the network and is used to identify the network.
  2. Host ID represents the IP Address of the host and is used to identify the host within the network.

 

IP Address Example-

 

Example of an IP Address is-

00000001.10100000.00001010.11110000

(Binary Representation)

OR

1.160.10.240

(Decimal Representation)

 

IP Addressing-

 

There are two systems in which IP Addresses are classified-

 

 

  1. Classful Addressing System
  2. Classless Addressing System

 

In this article, we will discuss about Classful Addressing System.

Learn about Classless Addressing System.

 

Classful Addressing-

 

In Classful Addressing System, IP Addresses are organized into following 5 classes-

 

 

  1. Class A
  2. Class B
  3. Class C
  4. Class D
  5. Class E

 

1. Class A-

 

If the 32 bit binary address starts with a bit 0, then IP Address belongs to class A.

 

In class A IP Address,

  • The first 8 bits are used for the Network ID.
  • The remaining 24 bits are used for the Host ID.

 

 

Total Number Of IP Addresses-

 

Total number of IP Addresses available in class A

= Numbers possible due to remaining available 31 bits

= 231

 

Total Number Of Networks-

 

Total number of networks available in class A

= Numbers possible due to remaining available 7 bits in the Net ID – 2

= 27 – 2

= 126

(The reason of subtracting 2 is explained later.)

 

Total Number Of Hosts-

 

Total number of hosts that can be configured in class A

= Numbers possible due to available 24 bits in the Host ID – 2

= 224 – 2

(The reason of subtracting 2 is explained later.)

 

Range Of 1st Octet-

 

We have-

  • Minimum value of 1st octet = 00000000 = 0
  • Maximum value of 1st octet = 01111111 = 127

 

From here,

  • Range of 1st octet = [0, 127]
  • But 2 networks are reserved and unused.
  • So, Range of 1st octet = [1, 126]

 

Use-

 

  • Class A is used by organizations requiring very large size networks like NASA, Pentagon etc.

 

2. Class B-

 

If the 32 bit binary address starts with bits 10, then IP Address belongs to class B.

 

In class B IP Address,

  • The first 16 bits are used for the Network ID.
  • The remaining 16 bits are used for the Host ID.

 

 

Total Number Of IP Addresses-

 

Total number of IP Addresses available in class B

= Numbers possible due to remaining available 30 bits

= 230

 

Total Number Of Networks-

 

Total number of networks available in class B

= Numbers possible due to remaining available 14 bits in the Net ID

= 214

 

Total Number Of Hosts-

 

Total number of hosts that can be configured in class B

= Numbers possible due to available 16 bits in the Host ID – 2

= 216 – 2

 

Range Of 1st Octet-

 

We have-

  • Minimum value of 1st octet = 10000000 = 128
  • Maximum value of 1st octet = 10111111 = 191

 

So, Range of 1st octet = [128, 191]

 

Use-

 

  • Class B is used by organizations requiring medium size networks like IRCTC, banks etc.

 

3. Class C-

 

If the 32 bit binary address starts with bits 110, then IP Address belongs to class C.

 

In class C IP Address,

  • The first 24 bits are used for the Network ID.
  • The remaining 8 bits are used for the Host ID.

 

 

Total Number Of IP Addresses-

 

Total number of IP Addresses available in class C

= Numbers possible due to remaining available 29 bits

= 229

 

Total Number Of Networks-

 

Total number of networks available in class C

= Numbers possible due to remaining available 21 bits in the Net ID

= 221

 

Total Number Of Hosts-

 

Total number of hosts that can be configured in class C

= Numbers possible due to available 8 bits in the Host ID – 2

= 28 – 2

 

Range Of 1st Octet-

 

We have-

  • Minimum value of 1st octet = 11000000 = 192
  • Maximum value of 1st octet = 110111111 = 223

 

So, Range of 1st octet = [192, 223]

 

Use-

 

  • Class C is used by organizations requiring small to medium size networks.
  • For example- engineering colleges, small universities, small offices etc.

 

4. Class D-

 

If the 32 bit binary address starts with bits 1110, then IP Address belongs to class D.

 

  • Class D is not divided into Network ID and Host ID.

 

 

Total Number Of IP Addresses-

 

Total number of IP Addresses available in class D

= Numbers possible due to remaining available 28 bits

= 228

 

Range Of 1st Octet-

 

We have-

  • Minimum value of 1st octet = 11100000 = 224
  • Maximum value of 1st octet = 11101111 = 239

 

So, Range of 1st octet = [224, 239]

 

Use-

 

  • Class D is reserved for multicasting.
  • In multicasting, there is no need to extract host address from the IP Address.
  • This is because data is not destined for a particular host.

 

5. Class E-

 

If the 32 bit binary address starts with bits 1111, then IP Address belongs to class E.

 

  • Class E is not divided into Network ID and Host ID.

 

 

Total Number Of IP Addresses-

 

Total number of IP Addresses available in class E

= Numbers possible due to remaining available 28 bits

= 228

 

Range Of 1st Octet-

 

We have-

  • Minimum value of 1st octet = 11110000 = 240
  • Maximum value of 1st octet = 11111111 = 255

 

So, Range of 1st octet = [240, 255]

 

Use-

 

  • Class E is reserved for future or experimental purposes.

 

Classes of IP Address-

 

All the classes of IP Address are summarized in the following table-

 

Class of IP Address Total Number of IP Addresses  1st Octet Decimal Range Number of Networks available Hosts per network Default Subnet Mask
Class A 231 1 – 126 27 – 2 224 – 2 255.0.0.0
Class B 230 128 – 191 214 216 – 2 255.255.0.0
Class C 229 192 – 223 221 28 – 2 255.255.255.0
Class D 228 224 – 239 Not defined Not defined Not defined
Class E 228 240 – 254 Not defined Not defined Not defined

 

Also Read- Practice Problems On IP Addressing

 

Important Notes-

 

Note-01:

 

  • All the hosts in a single network always have the same network ID but different Host ID.
  • However, two hosts in two different networks can have the same host ID.

 

Note-02:

 

  • A single network interface can be associated with more than one IP Address.

 

Note-03:

 

  • There is no relation between MAC Address and IP Address of a host.

 

Note-04:

 

  • IP Address of the network called Net ID is obtained by setting all the bits for Host ID to zero.

 

Note-05:

 

  • Class A Networks accounts for half of the total available IP Addresses.

 

Note-06:

 

In class A, total number of IP Addresses available for networks are 2 less.

 

  • This is to account for the two reserved network IP Addresses 0.xxx.xxx.xxx and 127.xxx.xxx.xxx.
  • IP Address 0.0.0.0 is reserved for broadcasting requirements.
  • IP Address 127.0.0.1 is reserved for loopback address used for software testing.

 

Note-07:

 

In all the classes, total number of hosts that can be configured are 2 less.

 

  • This is to account for the two reserved IP addresses in which all the bits for host ID are either zero or one.
  • When all Host ID bits are 0, it represents the Network ID for the network.
  • When all Host ID bits are 1, it represents the Broadcast Address.

 

Note-08:

 

  • Only those devices which have the network layer will have IP Address.
  •  So, switches, hubs and repeaters does not have any IP Address.

 

To gain better understanding about IP Addresses,

Watch this Video Lecture

 

Next Article- Casting | Types of Casting

 

Get more notes and other study material of Computer Networks.

Watch video lectures by visiting our YouTube channel LearnVidFun.